recliner seat base clips

[KA2S4]

Hi people,

Does anyone know if the wire clips are available for attaching the rubber diaphragm to the seat frame base on a factory recliner?

They are shorter than the standard clips as the diaphragm is the same but the seat is narrower than a standard non-recliner.

J

[Charlynsane]

hello

you will find what you need at sommerford spares

Take a look to this link

http://www.somerfordmini.co.uk/eshop/in ... age&id=132

maybe the item #30 or #31?

Charles

[KA2S4]

It's neither 30 or 31.

I'm just after the bent bits of wire that hold the rubber diaphragm to the frame.

They don't list them there, but they seem to come with the diaphragm itself (number 23)

J

[66S]

Hi james,
A spring-maker would be able to make them if you had a pattern.

Al

[KA2S4]

Yes that was my plan "B", should be very easy to make.

Newton said all hooks were the same, I do worry about them sometimes...

J

[Charlynsane]

maybe that?

http://www.datch.fr/fr/24a836-clip-de-d ... 17361.html

http://www.datch.fr/fr/14a3839-clip-de- ... 27022.html

http://www.datch.fr/fr/bha5097-clip-de- ... -4014.html

[KA2S4]

I'm after the short ones.

[mk1]

Would it not be easiest to make some.

[KA2S4]

The plan was always to make some, but I was just curious to see if they were available.

And I need about 60

J

[66S]

They are spring steel so not so easy to reproduce at home.. That is why I suggested a spring maker.

Al

[KA2S4]

"make some" above should be "have some made"