Wanted a "Clutch Specialist" to re-build a coil spring clutc
-
Sceptre123
- Basic 850
- Posts: 62
- Joined: Sun Feb 17, 2013 3:55 pm
Wanted a "Clutch Specialist" to re-build a coil spring clutc
Can anyone please recommend me a Clutch Specialist that may be able to help.
-
gs.davies
- Site Admin
- Posts: 1623
- Joined: Fri Oct 26, 2012 2:29 pm
- Location: Essex, UK
- Has thanked: 14 times
- Been thanked: 30 times
- Contact:
Re: Wanted a "Clutch Specialist" to re-build a coil spring c
They're fairly simple devices to be honest - when I did mine (about twenty years ago) I don't think there was much to it. You just need a tool to decompress the coils.
-
Sceptre123
- Basic 850
- Posts: 62
- Joined: Sun Feb 17, 2013 3:55 pm
Re: Wanted a "Clutch Specialist" to re-build a coil spring c
Ok, I'll give it a go then.
I have been lucky enough to find an original clutch kit, my only concern now is the balancing the clutch plate
I have been lucky enough to find an original clutch kit, my only concern now is the balancing the clutch plate
-
mk1
- Site Admin
- Posts: 19842
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 2 times
- Been thanked: 4 times
Re: Wanted a "Clutch Specialist" to re-build a coil spring c
As long as you match all the little stamped "A"'s up on the back plate, the flywheel & the diaphragm you can't go too far wrong.