I've fitted new bushes (Minispares 2A3034) to my pedals but the shaft won't fit through any more.
Does anyone know if they normally need to be reamed to size?
Brake and clutch pedal bush fitting
-
Lakeland997
- 1275 Cooper S
- Posts: 861
- Joined: Mon Feb 04, 2013 12:57 pm
- Location: Whitehaven
Brake and clutch pedal bush fitting
Sleep is my favourite thing in the world. It's what gets me out of bed in the morning.
-
mk1
- Site Admin
- Posts: 19835
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 3 times
- Been thanked: 10 times
Re: Brake and clutch pedal bush fitting
Nearly all bushes should be reamed before assembly.
I suspect (but don't know) that you would need a 9/16th's reamer.
M
I suspect (but don't know) that you would need a 9/16th's reamer.
M
Re: Brake and clutch pedal bush fitting
After fitting to take them back to the correct size.mk1 wrote:Nearly all bushes should be reamed before assembly.
-
mk1
- Site Admin
- Posts: 19835
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 3 times
- Been thanked: 10 times
Re: Brake and clutch pedal bush fitting
I meant re assembly of the component, not the bush.
Of course the bush can only be reamed once it is fitted.
M
Of course the bush can only be reamed once it is fitted.
M