Valve cover question
-
whitebuffalo
- Basic 850
- Posts: 58
- Joined: Tue Aug 17, 2010 2:08 am
- Location: Lancaster, Ca
- Contact:
Valve cover question
When I bought my 1960 Austin Seven it came with a tasty alloy valve cover. I cleaned it up and found that the inside has the name Coneco cast into it. Anyone know anything about them?
Auto Erotica:
1962 Morris Mini Traveller
1965 Hillman Imp
1966 Sunbeam Imp
1969 Hillman Husky
1962 Morris Mini Traveller
1965 Hillman Imp
1966 Sunbeam Imp
1969 Hillman Husky
-
foggy
- Posts: 17
- Joined: Tue Aug 03, 2010 10:33 pm
-
UHR850
- 1275 Cooper S
- Posts: 6234
- Joined: Thu Jun 24, 2010 3:26 pm
- Location: Huizen the Netherlands
- Been thanked: 6 times
Re: Valve cover question
I like a lot, never seen before very RARE ! The one I bought last year is very rare aswell.
http://excoboard.com/forums/13326/user/ ... 312791.jpg
http://excoboard.com/forums/13326/user/ ... 312791.jpg
DOWNTON Mini is what I like a lot.
Collecting 60th wooden steeringwheels.
Collecting 60th wooden steeringwheels.
-
littler
- 998 Cooper
- Posts: 293
- Joined: Thu Jun 24, 2010 7:11 pm
-
Vegard
- 1275 Cooper S
- Posts: 2042
- Joined: Mon Jun 28, 2010 1:33 pm
- Location: Norway
- Contact:
-
whitebuffalo
- Basic 850
- Posts: 58
- Joined: Tue Aug 17, 2010 2:08 am
- Location: Lancaster, Ca
- Contact:
Re: Valve cover question
On the Viking cover, what does that plate have written on it?
Auto Erotica:
1962 Morris Mini Traveller
1965 Hillman Imp
1966 Sunbeam Imp
1969 Hillman Husky
1962 Morris Mini Traveller
1965 Hillman Imp
1966 Sunbeam Imp
1969 Hillman Husky
-
mk1
- Site Admin
- Posts: 19846
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 3 times
- Been thanked: 8 times
Re: Valve cover question
I have seen the first one once or twice before but not one for sale.
Whitebuffalo, does your car have continuous US history, or did it came from Aus / NZ as I believe these covers are from that part of the world.
Whitebuffalo, does your car have continuous US history, or did it came from Aus / NZ as I believe these covers are from that part of the world.
-
whitebuffalo
- Basic 850
- Posts: 58
- Joined: Tue Aug 17, 2010 2:08 am
- Location: Lancaster, Ca
- Contact:
Re: Valve cover question
The car has a continuous US history. Was shipped to California from new and according to our department of motor vehicles it has been in California all it's life.
Auto Erotica:
1962 Morris Mini Traveller
1965 Hillman Imp
1966 Sunbeam Imp
1969 Hillman Husky
1962 Morris Mini Traveller
1965 Hillman Imp
1966 Sunbeam Imp
1969 Hillman Husky
-
Tim
- 1275 Cooper S
- Posts: 1280
- Joined: Thu Jun 24, 2010 11:55 pm
- Location: Tasmania, Australia
- Has thanked: 4 times
- Been thanked: 14 times
Re: Valve cover question
I think the Aussie ones that I have are a similar shape on the outside, but not as nicely cast on the inside.
Tim
Tim
1951 Morris Commercial J Type Van
1955 BSA C11G
1961 Morris Mini Traveller
1969 Triumph TR6R
1977 Leyland Moke Californian
1955 BSA C11G
1961 Morris Mini Traveller
1969 Triumph TR6R
1977 Leyland Moke Californian
-
whitebuffalo
- Basic 850
- Posts: 58
- Joined: Tue Aug 17, 2010 2:08 am
- Location: Lancaster, Ca
- Contact:
Re: Valve cover question
So is it the consensus that this rocker cover might be an Australian unit?
Auto Erotica:
1962 Morris Mini Traveller
1965 Hillman Imp
1966 Sunbeam Imp
1969 Hillman Husky
1962 Morris Mini Traveller
1965 Hillman Imp
1966 Sunbeam Imp
1969 Hillman Husky
-
mike owen
- Basic 850
- Posts: 37
- Joined: Fri Jun 25, 2010 6:10 am
Re: Valve cover question
I have a cover like this that has a S cast in it. I think it was on a sprite motor and it came from California. Nice period look!
Mike
Mike
-
mk1
- Site Admin
- Posts: 19846
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 3 times
- Been thanked: 8 times
Re: Valve cover question
I'm fairly certain its not a UK one.
It is definately similar to one available at one time in Aus, but as there are now 2 we know of in the States I reckon it's most likely a US one.
And very nice it is too.
It is definately similar to one available at one time in Aus, but as there are now 2 we know of in the States I reckon it's most likely a US one.
And very nice it is too.
-
vulcanbb18
- Basic 850
- Posts: 68
- Joined: Fri Sep 03, 2010 12:48 am
- Location: Brisbane, Oz
- Contact:
Re: Valve cover question
Hi All,
New here, but not new to minis
The typical Aussie alloy cover you see a lot of over here look like this :
There are variations but they all follow pretty closely to the above.
cheers,
Jacob
New here, but not new to minis
The typical Aussie alloy cover you see a lot of over here look like this :
There are variations but they all follow pretty closely to the above.
cheers,
Jacob
-
mk1
- Site Admin
- Posts: 19846
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 3 times
- Been thanked: 8 times
Re: Valve cover question
Hi Jacob,
There is also a version with the filler in the centre isn't there.
I had a bit of a thing about rocker covers at one time & managed to buy a few very nice ones from Aus that were both a reasonable price & different to those I see here in the UK.
That was a while ago though, interesting ones seem to be snapped up for silly money now though.
Its good to see you posting here mate!
There is also a version with the filler in the centre isn't there.
I had a bit of a thing about rocker covers at one time & managed to buy a few very nice ones from Aus that were both a reasonable price & different to those I see here in the UK.
That was a while ago though, interesting ones seem to be snapped up for silly money now though.
Its good to see you posting here mate!