10 and 11 studs

[baptiste]

Does anyone know the position of the 10th and 11th studs?

As on the following plans, I would like to know the distance in inches, it would be cool




Cheers,
Baptiste

[GraemeC]

I don't have the dimensions, but if you require them in order to drill a head/block then use a head gasket as a guide as the holes are in those ready.

[baptiste]

i woud like to know the position but thank you

[DougR]

Hi baptiste, the hole at the thermostat end is 3/8 and the hole at the heater valve end is 7/16. See attached pictures. Cheers, Doug.

20230722_222237.jpg

[baptiste]

thank you !