Looking for a new set of rings for Cooper S pistons AEG341 (std). Are they still available ?
Cheers Jim
Piston Rings
-
360gts
- 1275 Cooper S
- Posts: 3073
- Joined: Sat May 24, 2014 7:12 am
- Has thanked: 1 time
- Been thanked: 52 times
Re: Piston Rings
Jim,
I use these guys...best rings I can find.
Might be worth a look.
http://www.deves.com/devesrings/cars_AUSTIN.php
-
Spider
- 1275 Cooper S
- Posts: 4849
- Joined: Mon May 07, 2012 6:10 am
- Location: Big Red, Australia
- Has thanked: 181 times
- Been thanked: 64 times
Re: Piston Rings
Just be aware the original Cooper S rings were a true imperial sized ring. If the Pistons were replaced at some point in time, AE went to a Metric sized (thickness) ring 
Grant and Hastings are able to offer either. I've found them to be a good quality ring set with the proper 3 piece Oil Control Ring.
Grant and Hastings are able to offer either. I've found them to be a good quality ring set with the proper 3 piece Oil Control Ring.
-
YORKY
- Basic 850
- Posts: 49
- Joined: Tue Jan 20, 2015 9:49 pm
- Location: Dunfermline
- Been thanked: 1 time
Re: Piston Rings
Thanks for the replies, still deciding if its to be new rings or a rebore. If its a rebore which pistons would suit a road use only Cooper S ?
Cheers Jim
Cheers Jim
-
camshaft2
- Basic 850
- Posts: 76
- Joined: Sun May 29, 2011 10:44 pm
- Location: Devon
Re: Piston Rings
I used a firm called FW Thornton who supplied Hepolite nos rings for my standard sized 341 pistons. Block sleeved back using Westwood cylinder liners.
Paul.
Paul.