oil pump question

Post any technical questions or queries here.
Post Reply
User avatar
YMJ
1275 Cooper S
Posts: 1025
Joined: Thu Jun 24, 2010 2:31 pm
Location: Beyond the Sun

oil pump question

Post by YMJ »

'stripped my oil pump as it got covered in swarf (don't ask) but I forgot to mark which way up the external rotor (annulus) went. Luckily it has a dot stamped into one side ...which way should the dot face? towards the engine or away?
(There is not a similar dot punch mark on the internal rotor)
imack
998 Cooper
Posts: 453
Joined: Wed Oct 25, 2017 9:06 pm
Location: Kent
Been thanked: 10 times

Re: oil pump question

Post by imack »

Just taken an old pump apart and the dot on the outer rotor is towards the pump body/engine.
User avatar
YMJ
1275 Cooper S
Posts: 1025
Joined: Thu Jun 24, 2010 2:31 pm
Location: Beyond the Sun

Re: oil pump question

Post by YMJ »

It is new and it got covered in swarf...that why I said "don't ask!" :oops: :oops: :oops: :oops:

Moral of the story boys and girls...always have defined "dirty" and "clean" sections in your shed and don't use a grinder when you're half pissed on Veuve Cliquot
peasantslife
850 Super
Posts: 208
Joined: Thu Jun 29, 2017 2:48 pm
Location: Pen-y-bont ar Ogwr (S Wales)
Been thanked: 16 times

Re: oil pump question

Post by peasantslife »

No, start with just one bottle of Crystal, then shift gear onto £10 a bottle from Aldi/lidl/tesco's! (no one notices the swap)
That way you can be fully tanked before hitting the power tools!
Post Reply