MK3 S servo fixing

[johnv]

I have a new servo, and the minispares MK3 brackets .. I really can’t see how on earth it will all fit together where it’s supposed to .. have I got the right bits? Thanks

31BC034F-1EE8-4074-B7B5-444ED5D3B6E5.jpeg

[GraemeC]

The rear bracket only uses two of the 3 studs on the servo.

[johnv]

There are only 2 on this one .. I can’t see any way the bracket fixes on and matches up with any part of the car!
The angles all seem wrong

[bwaminispeed]

Here's a pic of original 1971 MKIII S brackets still in their original positions.....Not a great pic, but, good enough to see what you need.....

Both brackets bolt onto the right hand inner Flitch panel

Wiebe-71-MKIII-S-001.jpg

Here's the servo installed, but, you can't really see the rear bracket.....

Wiebe-71-MKIII-S-097.jpg

[johnv]

That’s helpful, thanks

[Simon776]

The Mini Spares Mk 3 S servo brackets do not fit a Mk 3 S servo - or at least they did not fit the NOS servo I had.

[johnv]

The Mini Spares Mk 3 S servo brackets do not fit a Mk 3 S servo - or at least they did not fit the NOS servo I had.

I think this is my problem.. The angle seems all wrong on the big bracket.. do you have a picture of a rear bracket that fits?