Hi
The original dip switch Has no identification On which terminal is which. Can anyone advise?
Thanks
Floor dip switch
-
colonel mustard
- 998 Cooper
- Posts: 572
- Joined: Wed Jan 16, 2019 2:57 pm
- Location: Derbyshire, UK
- Contact:
-
hanlminiman
- 1275 Cooper S
- Posts: 1369
- Joined: Thu Jun 24, 2010 3:12 pm
- Location: North Cotswolds, close to Prescott & Shelsley Walsh hill climb venues by Stratford upon Avon UK and
- Has thanked: 20 times
- Been thanked: 34 times
Re: Floor dip switch
Blue is the power supply. The other 2 are low (blue/red) and main beam (blue/white). I am also working on this and have been checking switches as Mini and mk1/2 Jaguar Lucas switches are different. 
If you check with a multimeter all should be revealed. Don't forget the rubber mount to the bulkhead under the switch.
Cliff
If you check with a multimeter all should be revealed. Don't forget the rubber mount to the bulkhead under the switch.
Cliff
-
colonel mustard
- 998 Cooper
- Posts: 572
- Joined: Wed Jan 16, 2019 2:57 pm
- Location: Derbyshire, UK
- Contact:
Re: Floor dip switch
Thanks Cliff, as always
Will do some testing, made a rubber gasket for it to sit on, look ok?
Will do some testing, made a rubber gasket for it to sit on, look ok?
You do not have the required permissions to view the files attached to this post.
-
woodypup59
- 1275 Cooper S
- Posts: 1570
- Joined: Thu Jun 24, 2010 5:28 pm
- Location: London UK
- Has thanked: 8 times
- Been thanked: 22 times
Re: Floor dip switch
Provided you identify the common terminal for the feed wire from the light switch, the other two don't matter.
The dip switch simply toggles between them.
The dip switch simply toggles between them.