Wet Primary Gear Flywheel Oil Seal

Rich997 · Post by **Rich997** » Tue Jun 30, 2020 1:35 pm

Can anyone confirm the part number and supplier for the correct flywheel oil seal for early 850 with wet tail crank.?

I see Somerford stock one but if possible I would like to find the right one one via a Bearing supplier or other.

Somerford only have one type in stock (they show two options).

I do have an old seal from a different early engine, which is GACO MIM 154 4862, not sure this is an OE seal though.

Any advice will be much appreciated.

Cheers,
Rich

Post by **Daz1968** » Tue Jun 30, 2020 6:33 pm

I used a wheel bearing oil seal, just can’t remember if it was front or rear, not had any issues with it, the original seal was NLA when I did mine

Post by **woodypup59** » Tue Jun 30, 2020 7:31 pm

Front hub oil seal for a drum braked car.

whistler · Post by **whistler** » Tue Jun 30, 2020 7:41 pm

Parts book shows superceded to 22A214. Somefords supercede it to 22A325.

Rich997 · Post by **Rich997** » Tue Jun 30, 2020 11:31 pm

Thanks for the advice.

I will look for hub seals.

Cheers,
Rich

mk1-forum.net

Wet Primary Gear Flywheel Oil Seal

Wet Primary Gear Flywheel Oil Seal

Re: Wet Primary Gear Flywheel Oil Seal

Re: Wet Primary Gear Flywheel Oil Seal

Re: Wet Primary Gear Flywheel Oil Seal

Re: Wet Primary Gear Flywheel Oil Seal