Exhaust Valve for 12G295

Post by **Fanfaniracing** » Mon Mar 30, 2020 9:48 am

Looking for an Exhaust Valve for my 12G295 Head.

Is the C-AEG106 an adequate option?

http://minispares.com/product/Classic/E ... o%20search

In the description they say for 12G940 Head, but will it also work for a Small Bore Cooper Head?

I allready have 29.5mm Valves in this Head, but need replace those...

Many thanks

Fabian

Post by **Dearg1275** » Mon Mar 30, 2020 10:02 am

These valves are of the longer variety at 3.57 inch, the small bore ones are 3.44 inch. If you use a mix of the two lengths you will have problems getting the rocker geometry right.

D

Post by **Fanfaniracing** » Mon Mar 30, 2020 11:09 am

Dearg1275 wrote: ↑Mon Mar 30, 2020 10:02 am These valves are of the longer variety at 3.57 inch, the small bore ones are 3.44 inch. If you use a mix of the two lengths you will have problems getting the rocker geometry right.

D

Okay!

So i allready have inlet valves of 91mm so that's approximately 3.57 inch.

I guess the new exhaust valves work with the new valves

bwaminispeed · Post by **bwaminispeed** » Mon Mar 30, 2020 2:58 pm

Don't forget, you'll have to pack up the valve springs to get the spring pressure's right........

mk1-forum.net

Exhaust Valve for 12G295

Exhaust Valve for 12G295

Re: Exhaust Valve for 12G295

Re: Exhaust Valve for 12G295

Re: Exhaust Valve for 12G295