How do I install the front sliding window on a MK1 Austin Mini? Any resources on this?
How do I attach the catch (see picture attached) to the sliding window?
Thanks for any help
Sliding Window Installation
-
mexran
- Posts: 5
- Joined: Mon Mar 09, 2020 7:49 pm
Sliding Window Installation
You do not have the required permissions to view the files attached to this post.
-
timmy201
- 1275 Cooper S
- Posts: 2018
- Joined: Mon Jun 10, 2013 9:57 am
- Location: Australia
- Been thanked: 41 times
Re: Sliding Window Installation
How I did it:
Install the top seal to the door
Add the glass and catches to the lower frame rail
Lift the glass and lower rail up and get the top of the glass in the top seal and then get the lower rail in place. Then put the screws in to retain the lower rail
The catch has a screw on the inside, undo that and the catch goes through the glass and the chrome threaded button goes in from the outside
Install the top seal to the door
Add the glass and catches to the lower frame rail
Lift the glass and lower rail up and get the top of the glass in the top seal and then get the lower rail in place. Then put the screws in to retain the lower rail
The catch has a screw on the inside, undo that and the catch goes through the glass and the chrome threaded button goes in from the outside
-
mexran
- Posts: 5
- Joined: Mon Mar 09, 2020 7:49 pm
Re: Sliding Window Installation
Thank you for the information. It was very helpful. Cheers.timmy201 wrote: ↑Tue Mar 10, 2020 9:21 pm How I did it:
Install the top seal to the door
Add the glass and catches to the lower frame rail
Lift the glass and lower rail up and get the top of the glass in the top seal and then get the lower rail in place. Then put the screws in to retain the lower rail
The catch has a screw on the inside, undo that and the catch goes through the glass and the chrome threaded button goes in from the outside