cooper s block . two end caps missing

Pedromintor · Post by **Pedromintor** » Wed Jan 29, 2020 9:29 am

Hi
I Have a thick flange 1275 cooper s block. It only has the centre end cap with it. other two were lost before I bought it.
What is my options ? find second ones and line bore ? or a new set and line bore ?
Any advise would be good.

Thank you
Peter

Post by **iain1967s** » Wed Jan 29, 2020 11:46 am

There are a few vendors who sell repo caps.

https://www.7ent.com/products/steel-mai ... n0049.html

https://www.aptfast.com/ShowItem/101216 ... r%20S.aspx

Post by **Fanfaniracing** » Wed Jan 29, 2020 8:55 pm

I would go for the APT ones with a Set of good ARP Bolts!

I am very happy with my ones...

Post by **Spider** » Wed Jan 29, 2020 11:55 pm

You could go either way as a 'fix' but working from new caps will be easier and give a better result.

Post by **Charlynsane** » Thu Jan 30, 2020 3:17 pm

Swiftune sells a nice set as well

https://swiftune.com/parts-shop/engine- ... -1040.html

mk1 · Post by **mk1** » Sat Feb 01, 2020 10:12 am

Pretty much all suppliers will be able to sell you a set of caps. The expense in the operation isn't the caps it's the machining that they will need.

Expect to pay £400 +.

No point just doing 2, do them all, it won't cost any more.

Post by **Vegard** » Sun Feb 02, 2020 4:11 am

Spider wrote:You could go either way as a 'fix' but working from new caps will be easier and give a better result.

What he says!

mk1-forum.net

cooper s block . two end caps missing

cooper s block . two end caps missing

Re: cooper s block . two end caps missing

Re: cooper s block . two end caps missing

Re: cooper s block . two end caps missing

Re: cooper s block . two end caps missing

Re: cooper s block . two end caps missing

Re: cooper s block . two end caps missing