Floor Start

[locrep]

Hi, Has anyone a picture of where the floor start switch wires go through the floor panel on a MK1.

Thanks Dave.

[Daz1968]

If you look on this picture when I was starting the resto on my mk1 you can see the grommet and the wire although it has been cut to remove the loom as I hadn't got access to underside at the time, and was rebuilding the loom anyway,

[ivor badger 2]

The cables to the floor start switch don't go through the floor, only the switch.

[Daz1968]

As far as I am aware the wire I have shown just connects to battery side of the floorstart switch and takes power to the regulator box. The actual switch for starting is a mechanical device and simply connects starter to battery cable when depressed

[woodypup59]

As far as I am aware the wire I have shown just connects to battery side of the floorstart switch and takes power to the regulator box. The actual switch for starting is a mechanical device and simply connects starter to battery cable when depressed

What he said.

Its a ~1/4" dia cable, which goes through a grommet above the gear lever. Not the heavy (~ 1/2") starter and battery cables.

[locrep]

Thanks for all the responses, the picture is just what I needed.

Dave.