A40 clutch master cylinder

[Andrew1967]

Does anyone know if a 4223-071 Lockheed clutch master cylinder will fit a Mini ?

Same canister etc but not sure on orientation of tin. Presume push rod is different.

Cheers

Andrew

[Andrew1967]

Difficult question to answer by the looks of it

[nick rogers]

Andrew, I am not sure about A40 hydraulics but I will attempt an answer. The bore is 0.75" like the Mini, the orientation is correct but the pushrod is shorter.
I am happy to be corrected.

[Andrew1967]

Andrew, I am not sure about A40 hydraulics but I will attempt an answer. The bore is 0.75" like the Mini, the orientation is correct but the pushrod is shorter.
I am happy to be corrected.

Thanks Nick, appreciate your reply and I was thinking along the same lines.

Will let you know in the next few days

Andrew

[pigpen]

I have a Mini clutch m/c in my A40. Seems to do the trick...
Tom

[Andrew1967]

Thanks Tom,

I read on the A40 forum that they use Mini ones in the absence of the correct A40 cylinder

Cheers

Andrew