Post any technical questions or queries here.
Spitz
998 Cooper
Posts: 585 Joined: Thu Jun 24, 2010 5:37 pm
Location: Saskatchewan, CA
Post
by Spitz » Sun Oct 17, 2010 11:40 pm
Can anyone explain these semi circular cut-outs on the front corner of seat frames from a 67?
My MkIII and MkIV frames do not have these but identical in every other way.
Spitz
998 Cooper
Posts: 585 Joined: Thu Jun 24, 2010 5:37 pm
Location: Saskatchewan, CA
Post
by Spitz » Mon Oct 18, 2010 5:22 pm
Come on now....I planned on bragging at another forum that the MkI forum was more knowledgeable...lol
GraemeC
1275 Cooper S
Posts: 2273 Joined: Thu Jun 24, 2010 1:05 pm
Location: Hiding From The Dog... NW Eng
Has thanked: 2 times
Been thanked: 3 times
Post
by GraemeC » Mon Oct 18, 2010 5:24 pm
Better access to the floor start button when the seat is plled forward?
Spitz
998 Cooper
Posts: 585 Joined: Thu Jun 24, 2010 5:37 pm
Location: Saskatchewan, CA
Post
by Spitz » Mon Oct 18, 2010 5:55 pm
This is what I was thinking. I assume they made all the seats the same as both my L and R seats have this.
I posed the question in several places and this is the only response so far....mmmm
Perhaps this is a not very often noticed thing
Toby
1275 Cooper S
Posts: 1460 Joined: Thu Jun 24, 2010 12:29 pm
Location: the Netherlands
Has thanked: 7 times
Been thanked: 3 times
Post
by Toby » Mon Oct 18, 2010 6:54 pm
G is right
T.
mk1
Site Admin
Posts: 19846 Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 3 times
Been thanked: 8 times
Post
by mk1 » Tue Oct 19, 2010 9:03 am
It's been said before "G is indeed right".