Page 1 of 1
Arden Crossflow Flow figures
Posted: Fri Oct 19, 2012 10:42 am
by lisian_1275
Hi Guys
Can anyone tell me what the flow figures are on the new Arden 8 Port Crossflow??????
I am putting a new Arden head on my Flowbench an d would like to compare the results.
Also if anyone has a Crossflow they have had flowed, I would be interested in their results.
Thanks
Ian
Re: Arden Crossflow Flow figures
Posted: Mon Oct 22, 2012 7:51 am
by lisian_1275
So no takers. Oh well, hear are the results.
This is for an out of the box, untouched as yet, Arden Race Crossflow.
Taken at 25"
.100 31.1 Cfm
.200 68.1
.300 98.1
.400 122.5
.500 137.9
Air Speed 330.9 ft/sec
Potential Hp 148.93
Got to be happy with that.
Will give an update when I have finished modifying the head and it run on the Dyno.
Thanks
Ian
Re: Arden Crossflow Flow figures
Posted: Wed Oct 24, 2012 9:41 am
by mk1
Thanks for a very interesting post Ian.
Is that the figures for one of the New Minispares ones or an original?
Although we have a good depth of knowledge on here I doubt there are many regular posters who have a flow bench handy.
M
Re: Arden Crossflow Flow figures
Posted: Wed Oct 24, 2012 10:10 am
by lisian_1275
Hi
This is for a new Arden from Minispares, the race version which I believe is the regular head except with higher tension springs and 37mm Inlet valve. I can stand corrected though.
Thanks
Ian