Looking to buy new or good used servo body MAIN SPRING and new or good, with chrome intact PUSH ROD for same.
These parts will be the same across the S type servo No ring, One ring and Two ring range
Ok then......., made the 7.1mm dia push rod. What about the spring...............
Lockheed 'S' servo parts
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
4) Please always include your LOCATION
Rev 2.0 (10.09.2024)
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
4) Please always include your LOCATION
Rev 2.0 (10.09.2024)
-
Peter Laidler
- 1275 Cooper S
- Posts: 6344
- Joined: Sat Jul 15, 2017 5:35 pm
- Location: Abingdon Oxfordshire
- Has thanked: 115 times
- Been thanked: 97 times