Rod Change Gearbox Builds 2025
Posted: Sun Dec 29, 2024 7:31 pm
Floating this early in readiness for Blyton 2025 to see if there is any interest in rod change gearbox builds:
22G1832
DAM2886
DAM5626
Can be fitted with standard ratio/close ratio helical gears or new straight cut gears and a final drive ratio of choice(from 2.7 through to 4.1)
Standard diff cage or x-pin.
New bearings, genuine baulks, seals, gaskets, layshaft and centre oil pick up.
I can add price to the advert for your required casing and specification.
Casings will be solvent cleaned and can be vapour blasted if required.
Can also supply transfer case, gasket and idler gear shimmed ready to fit.
Regards Jason
22G1832
DAM2886
DAM5626
Can be fitted with standard ratio/close ratio helical gears or new straight cut gears and a final drive ratio of choice(from 2.7 through to 4.1)
Standard diff cage or x-pin.
New bearings, genuine baulks, seals, gaskets, layshaft and centre oil pick up.
I can add price to the advert for your required casing and specification.
Casings will be solvent cleaned and can be vapour blasted if required.
Can also supply transfer case, gasket and idler gear shimmed ready to fit.
Regards Jason