Oil filter housing pipe
Posted: Fri Oct 18, 2024 11:53 am
Anyone have a spare one of these....early style with the brass banjo end.
local UK postage.
Thanks
local UK postage.
Thanks
mk1-forum.net
A friendly international forum for people interested in the tuning & modification of classic BMC vehicles
https://mk1-forum.net/
Oil filter housing pipe
Page 1 of 1
Re: Oil filter housing pipe
Posted: Sun Oct 20, 2024 12:34 pm
I have one with filter and oil temp fittings £20
Re: Oil filter housing pipe
Posted: Sun Oct 20, 2024 3:15 pm
Re: Oil filter housing pipe
Posted: Sun Oct 20, 2024 6:39 pm
Re: Oil filter housing pipe
Posted: Mon Oct 21, 2024 3:27 pm
If you are stuck Dermott, it is easy to make another. Just unpick the silver soldered connection on the banjo end and bend a new 3/8" (?) copper or brass pipe to suit. Flare the nut end.
I used a soft soldered joint at the banjo end and it lasted for many months on my S while I had the cooler disconnected and was replacing the filter assembly to screw-on filter spec I gave it away to someone who wanted a shiny one, a couple of months ago
I used a soft soldered joint at the banjo end and it lasted for many months on my S while I had the cooler disconnected and was replacing the filter assembly to screw-on filter spec I gave it away to someone who wanted a shiny one, a couple of months ago