Tool central Ignition key ring.

Post by **UHR850** » Thu Jan 12, 2023 8:07 am

What kind of tool do you use to lose or tighten the ring around the ignition key ?

Kees.

Post by **111Robin** » Thu Jan 12, 2023 8:36 am

This is the sort of thing, or you can make do with a pair of circlip pliers or similar.

https://www.ebay.co.uk/itm/182387913618 ... 7NEALw_wcB

mk1 · Post by **mk1** » Thu Jan 12, 2023 9:15 am

It's easy to file one from a bit of tube.

Post by **AndyB72** » Thu Jan 12, 2023 9:36 am

I filled down an old/cheap socket.

Post by **Peter Laidler** » Thu Jan 12, 2023 9:38 am

I would imagine that somewhere, there is a special Churchill or Sykes Pickavant tool for the job but in the spirit of KISS, or Keep it Simple......... As per Robin. Circlip or needle nose pliers. ,

Post by **UHR850** » Thu Jan 12, 2023 10:00 am

Thanks, I expected these answers so let's do the DIY self made job.

Terence · Post by **Terence** » Thu Jan 12, 2023 3:36 pm

This I believe
https://www.ebay.ca/itm/284791204066?_t ... %7Ciid%3A1

Post by **Exminiman** » Thu Jan 12, 2023 3:55 pm

Terence wrote: ↑Thu Jan 12, 2023 3:36 pm This I believe
https://www.ebay.ca/itm/284791204066?_t ... %7Ciid%3A1

Wow, had never imagined there would be a tool to do it, always just used a fat screw driver

Terence · Post by **Terence** » Thu Jan 12, 2023 4:46 pm

Another less elaborate version
https://www.ebay.ca/itm/202581007940?_t ... %7Ciid%3A1

mk1-forum.net

Tool central Ignition key ring.

Tool central Ignition key ring.

Re: Tool central Ignition key ring.

Re: Tool central Ignition key ring.

Re: Tool central Ignition key ring.

Re: Tool central Ignition key ring.

Re: Tool central Ignition key ring.

Re: Tool central Ignition key ring.

Re: Tool central Ignition key ring.

Re: Tool central Ignition key ring.