Page 1 of 1

Installing stainless upper door trim

Posted: Fri Apr 08, 2022 3:11 am
by 65MK1S
Is there a video of installing the upper door trim? Orrrrrr, a relatively simple
set of instructions? Thanks
Kent

Re: Installing stainless upper door trim

Posted: Fri Apr 08, 2022 3:33 am
by TECH396
The trim should first slide down over the 3:vertical retaining clips at the rear of the door, and then slide over the one forward / lower clip. ( These are the thin flat clips)
The remaining 6 are domed and the trim will snap on with a bit of persuasion. ( Best to start these ones by twisting the trim to fit one side of each clip at a time)There are 4 of the flat style and 6 of the rounded style per door. I've heard that some aftermarket retaining clips don't work.

Re: Installing stainless upper door trim

Posted: Fri Apr 08, 2022 4:39 am
by 65MK1S
THANKS!!!! TECH396 really appreciate it :)
Kent