Hi All,
I have been trying to get the deep scratches out of my britax weather shield frame. I have used 240-2500 grit with WD40 then onto sisal, stitched and soft wheels with alternating brown and blue compound. It’s ok but not great. Any suggestions on a better way to achieve getting the deeper scratches out and to fine polish ready for re-anodising.
Thanks all.
Polishing anodised aluminium
-
colonel mustard
- 998 Cooper
- Posts: 572
- Joined: Wed Jan 16, 2019 2:57 pm
- Location: Derbyshire, UK
- Contact:
Polishing anodised aluminium
You do not have the required permissions to view the files attached to this post.
-
Nick W
- 1275 Cooper S
- Posts: 2892
- Joined: Sat Jan 17, 2015 8:59 pm
- Location: sheffield
- Has thanked: 1 time
- Been thanked: 8 times
Re: Polishing anodised aluminium
Think it looks ok to me, but is it corroded through in those few places?
Up North in Sheffield
-
colonel mustard
- 998 Cooper
- Posts: 572
- Joined: Wed Jan 16, 2019 2:57 pm
- Location: Derbyshire, UK
- Contact:
Re: Polishing anodised aluminium
Hi Nick
Yes a tad pitted in areas, which it is what it is. I was trying to get the small pitting out and the smearing on the polished face.
Yes a tad pitted in areas, which it is what it is. I was trying to get the small pitting out and the smearing on the polished face.