value of straight cut gear set
-
- 998 Cooper
- Posts: 296
- Joined: Wed Jan 15, 2014 7:40 pm
- Location: somerset
- Been thanked: 1 time
value of straight cut gear set
Does any one know the value of a used 3 syncro straight cut gear set? With layshaft. shafts etc. bearings etc.
thanks
Peter
thanks
Peter
-
- 998 Cooper
- Posts: 296
- Joined: Wed Jan 15, 2014 7:40 pm
- Location: somerset
- Been thanked: 1 time
-
- 1275 Cooper S
- Posts: 1670
- Joined: Sun Jun 27, 2010 5:26 pm
- Location: Warwickshire
- Been thanked: 6 times
Re: value of straight cut gear set
Probably all depends on how much use its had .
Sometimes they can be very rough on first gear
Sometimes they can be very rough on first gear
-
- 1275 Cooper S
- Posts: 3920
- Joined: Mon Jul 24, 2017 5:55 pm
- Location: South Wales
- Has thanked: 18 times
- Been thanked: 50 times
Re: value of straight cut gear set
A complete straight cut set in a 1071 box sold recently on eBay. The casing had been repaired so difficult to judge the value of that, but this is what i went for, with carriage on top
You do not have the required permissions to view the files attached to this post.
-
- 998 Cooper
- Posts: 609
- Joined: Sat Aug 21, 2010 4:05 am
Re: value of straight cut gear set
It wasn't the gears in that box that brought the money, it was the case.......Probably would have sold for the same price empty....
A basic set of used 3 synch gears, no box, (so long as first gear wasn't trashed), couldn't reasonably be worth any more than 100 pounds, max 150 if they are in good condition.....
A basic set of used 3 synch gears, no box, (so long as first gear wasn't trashed), couldn't reasonably be worth any more than 100 pounds, max 150 if they are in good condition.....
- iain1967s
- 1275 Cooper S
- Posts: 1844
- Joined: Sat Jun 10, 2017 12:46 am
- Location: Cambridge, MA, USA
- Been thanked: 7 times
Re: value of straight cut gear set
A couple of years ago I was watching this eBay auction, most of two complete sets for £345 final total
https://www.ebay.ie/itm/254056012730
(before I decided to build my 333 gearbox using NOS helical, a much more expensive option!)
Another more recent but quite heavily used bare set didn’t sell at £130
https://www.ebay.ie/itm/224172305106
So £150 for a good used set complete with shafts and bearings seems about right.
https://www.ebay.ie/itm/254056012730
(before I decided to build my 333 gearbox using NOS helical, a much more expensive option!)
Another more recent but quite heavily used bare set didn’t sell at £130
https://www.ebay.ie/itm/224172305106
So £150 for a good used set complete with shafts and bearings seems about right.
-
- 1275 Cooper S
- Posts: 1670
- Joined: Sun Jun 27, 2010 5:26 pm
- Location: Warwickshire
- Been thanked: 6 times
Re: value of straight cut gear set
I would say £150 for a used set with some damage on first is about right
So what would a NOS genuine set be worth ?
So what would a NOS genuine set be worth ?

- Andrew1967
- 1275 Cooper S
- Posts: 7927
- Joined: Thu Jun 24, 2010 6:35 pm
- Location: Usually in my garage on the east coast of Norfolk, UK
- Been thanked: 8 times
Re: value of straight cut gear set
I paid £250 for a genuine NOS ST straight cut set last year ... but think it was a bit of a bargain 

-
- 1275 Cooper S
- Posts: 3920
- Joined: Mon Jul 24, 2017 5:55 pm
- Location: South Wales
- Has thanked: 18 times
- Been thanked: 50 times
Re: value of straight cut gear set
I did wonder but the case had significant repair work that is difficult to quantify in terms of reliability and robustness.bwaminispeed wrote: ↑Sat Feb 06, 2021 12:28 am It wasn't the gears in that box that brought the money, it was the case.......Probably would have sold for the same price empty....
A basic set of used 3 synch gears, no box, (so long as first gear wasn't trashed), couldn't reasonably be worth any more than 100 pounds, max 150 if they are in good condition.....
I did sell a set before I joined this forum on eBay. Used but very nice - probably had 30 - 40 track outings and no more. They went for £355 if that’s anything to go on? Three keen bidders so that’s another ‘who wants them’ factor
-
- 998 Cooper
- Posts: 609
- Joined: Sat Aug 21, 2010 4:05 am
Re: value of straight cut gear set
That 190 gearbox, I think is the rarest of the rare, so, even with the damage, someone was bound to cough up large for it.....
A brand new set can be purchased for about 265 Squid I think......minus shafts and bearings.....
A brand new set can be purchased for about 265 Squid I think......minus shafts and bearings.....
-
- 998 Cooper
- Posts: 609
- Joined: Sat Aug 21, 2010 4:05 am
-
- 998 Cooper
- Posts: 343
- Joined: Sat Apr 07, 2012 11:45 pm
- Location: New Zealand
- Has thanked: 1 time
- Been thanked: 1 time
Re: value of straight cut gear set
Don't forget to add vat to that price.
I am amazed that the bearing kits are the same or more money. Gearbox rebuilds are expensive these days.
I am amazed that the bearing kits are the same or more money. Gearbox rebuilds are expensive these days.
-
- 998 Cooper
- Posts: 609
- Joined: Sat Aug 21, 2010 4:05 am
Re: value of straight cut gear set
I'm in Canada, so, no vat, but, through the nose for shipping......
Yeah, they are.......
Yeah, they are.......