Rubber on glass first or rubber in body first ?
A slight complication is that a custom tilt is fitted (made of stainless mesh), fitted with 24 small bolts.
It would be really nice not to have to remove it !
Pickup back light fitting
-
woodypup59
- 1275 Cooper S
- Posts: 1570
- Joined: Thu Jun 24, 2010 5:28 pm
- Location: London UK
- Has thanked: 8 times
- Been thanked: 22 times
Pickup back light fitting
Any hints re fitting the back window on a pickup ?
Rubber on glass first or rubber in body first ?
A slight complication is that a custom tilt is fitted (made of stainless mesh), fitted with 24 small bolts.
It would be really nice not to have to remove it !
Rubber on glass first or rubber in body first ?
A slight complication is that a custom tilt is fitted (made of stainless mesh), fitted with 24 small bolts.
It would be really nice not to have to remove it !
-
Andrew1967
- 1275 Cooper S
- Posts: 7927
- Joined: Thu Jun 24, 2010 6:35 pm
- Location: Usually in my garage on the east coast of Norfolk, UK
- Been thanked: 8 times
Re: Pickup back light fitting
Rubber around body like the front screen 
Sounds a bit tricky with the tilt in situ thou
Sounds a bit tricky with the tilt in situ thou
-
GraemeC
- 1275 Cooper S
- Posts: 2288
- Joined: Thu Jun 24, 2010 1:05 pm
- Location: Hiding From The Dog... NW Eng
- Has thanked: 2 times
- Been thanked: 7 times
Re: Pickup back light fitting
Is the rear screen like the front screen - ie with a locking strip (a Claytonrite seal)? If so it is seal on car then fit glass.
No locking strip (direct glazing) then it is seal on glass then fit to car with para chord.
No locking strip (direct glazing) then it is seal on glass then fit to car with para chord.