mk1-forum.net

Hi
The original dip switch Has no identification On which terminal is which. Can anyone advise?

Thanks

Blue is the power supply. The other 2 are low (blue/red) and main beam (blue/white). I am also working on this and have been checking switches as Mini and mk1/2 Jaguar Lucas switches are different.
If you check with a multimeter all should be revealed. Don't forget the rubber mount to the bulkhead under the switch.
Cliff

Thanks Cliff, as always
Will do some testing, made a rubber gasket for it to sit on, look ok?

Provided you identify the common terminal for the feed wire from the light switch, the other two don't matter.

The dip switch simply toggles between them.