151 block ?
Posted: Sat Apr 25, 2015 8:32 pm
i have a block with 74.5 pistons 177 rods is it a 1071 over bore and could it be relined there is not alot of meat left between bores
thanks
thanks
mk1-forum.net
A friendly international forum for people interested in the tuning & modification of classic BMC vehicles
https://mk1-forum.net/
151 block ?
Page 1 of 1
Re: 151 block ?
Posted: Sat Apr 25, 2015 9:46 pm
If it has the AEG151 casting on it...then it is a 1071.
Re: 151 block ?
Posted: Sun Apr 26, 2015 7:24 pm
Or a 970.
Re: 151 block ?
Posted: Sun Apr 26, 2015 8:56 pm
it also has a cross drlled crank with aeg 1053 cast into it
Re: 151 block ?
Posted: Sun Apr 26, 2015 9:02 pm
970 is AEG131.
Re: 151 block ?
Posted: Sun Apr 26, 2015 10:12 pm
970 crank is AEG 330 , 1071 is AEG 171 
Re: 151 block ?
Posted: Mon Apr 27, 2015 10:04 am
My records here are not complete, but according to what I do have, it appears that there wasn't a Cross Drilled Factory Crank made for the 970 or the 1071.mk1mad wrote:it also has a cross drlled crank with aeg 1053 cast into it
Can anyone confirm this?
That said, I also don't have a listing for an AEG1053 Crank either.