gearbox parts identify
Posted: Wed Feb 04, 2015 3:11 am
Hi, pls help to identify this pin I found on the bench after a gearbox stripping!
Thx!
Thx!
mk1-forum.net
A friendly international forum for people interested in the tuning & modification of classic BMC vehicles
https://mk1-forum.net/
gearbox parts identify
Page 1 of 1
Re: gearbox parts identify
Posted: Wed Feb 04, 2015 3:48 am
Diff cross pin....................now it's an OH! SHIT pin..............Just an educated guess haven't had one out in years
Re: gearbox parts identify
Posted: Wed Feb 04, 2015 4:01 am
It's the Pin from a Pin Drive Cam. I'm surprised it doesn't happen more often.
Re: gearbox parts identify
Posted: Wed Feb 04, 2015 4:44 am
It measured about an inch and looks a bit big for cam'pin! What else could it be?
Re: gearbox parts identify
Posted: Wed Feb 04, 2015 9:47 pm
Reverse gear switch actuation thingy?
Ian
Ian
Re: gearbox parts identify
Posted: Thu Feb 05, 2015 9:13 am
I would say its the pin from the cam as it has little flats on it, but then again, are they not just a roll pin?
its not the reverse plunger as that has more rounded ends
its not a gearbox part
its not the reverse plunger as that has more rounded ends
its not a gearbox part
Re: gearbox parts identify
Posted: Fri Jul 17, 2015 8:08 am
I removed one of these yesterday (to do a slot drive conversion);-Spider wrote:It's the Pin from a Pin Drive Cam. I'm surprised it doesn't happen more often.
Re: gearbox parts identify
Posted: Fri Jul 17, 2015 9:07 am
well, that answers that!!
cheers for letting us all know!
cheers for letting us all know!
Re: gearbox parts identify
Posted: Fri Jul 17, 2015 9:16 am
Life can once again continue!rich@minispares.com wrote:
cheers for letting us all know!
