gearbox parts identify

970s · Post by **970s** » Wed Feb 04, 2015 3:11 am

Hi, pls help to identify this pin I found on the bench after a gearbox stripping!
Thx!

Post by **minimans** » Wed Feb 04, 2015 3:48 am

Diff cross pin....................now it's an OH! SHIT pin..............Just an educated guess haven't had one out in years

Post by **Spider** » Wed Feb 04, 2015 4:01 am

It's the Pin from a Pin Drive Cam. I'm surprised it doesn't happen more often.

970s · Post by **970s** » Wed Feb 04, 2015 4:44 am

It measured about an inch and looks a bit big for cam'pin! What else could it be?

Post by **ianh1968** » Wed Feb 04, 2015 9:47 pm

Reverse gear switch actuation thingy?

Ian

Post by **rich@minispares.com** » Thu Feb 05, 2015 9:13 am

I would say its the pin from the cam as it has little flats on it, but then again, are they not just a roll pin?

its not the reverse plunger as that has more rounded ends

its not a gearbox part

Post by **Spider** » Fri Jul 17, 2015 8:08 am

Spider wrote:It's the Pin from a Pin Drive Cam. I'm surprised it doesn't happen more often.

I removed one of these yesterday (to do a slot drive conversion);-

Post by **rich@minispares.com** » Fri Jul 17, 2015 9:07 am

well, that answers that!!

cheers for letting us all know!

Post by **Spider** » Fri Jul 17, 2015 9:16 am

rich@minispares.com wrote:
cheers for letting us all know!

Life can once again continue!

mk1-forum.net

gearbox parts identify

gearbox parts identify

Re: gearbox parts identify

Re: gearbox parts identify

Re: gearbox parts identify

Re: gearbox parts identify

Re: gearbox parts identify

Re: gearbox parts identify

Re: gearbox parts identify

Re: gearbox parts identify