Page 1 of 1
Mk1/2 door hinges - which is which?
Posted: Fri Jan 23, 2015 11:02 pm
by mini5967
Howdy all, got a set of NOS Mk1/2 door hinges that came into my possession a while back as part of a job lot, and which I'm hoping to use during the resto of my '64 850, but I'm trying to work out which ones go exactly where; as I don't have a parts book to hand, I thought I'd throw it out there to you all. I've got 5 of them, and I'm presuming that the numbers stamped at the end furthest away from the engine bay are the key to where they go - I have a 13, 14, 15 and 2 x 16. Hope that all makes sense - over to you folks…
Re: Mk1/2 door hinges - which is which?
Posted: Sat Jan 24, 2015 6:59 am
by coop12g295
Nos stamped near the hinge pin and 1 2 os top 3 4 ns top 5 6os bottom 7 8 ns bottom and you should
have angled spacers to allow for the curve of the door panel
Ian
Re: Mk1/2 door hinges - which is which?
Posted: Sat Jan 24, 2015 11:01 am
by mini5967
Is one number stamped on the A panel side, and the other on the door side? If that's the case, then they're all 7 8 ones - bugger! Thanks anyway - at least I can use one, keep one as a spare, and try and flog/trade/swap the others…
Re: Mk1/2 door hinges - which is which?
Posted: Sat Jan 24, 2015 12:01 pm
by coop12g295
Yes each part individually stamped 1 2 and 3 4 have a noticeable angle for the top of the door
Re: Mk1/2 door hinges - which is which?
Posted: Sat Jan 24, 2015 2:38 pm
by skorstensfejeren
here you go....
Re: Mk1/2 door hinges - which is which?
Posted: Sun Jan 25, 2015 5:59 am
by tsumini
LHsm.jpg
RHsm.jpg
Here's what cam with early MK1 (Jan 60)