Found a half inch lobe cam with slot drive and one raised square shouldered ring between the inlet and oulet lobe of No3. No other markings. What is this?
Found also a AEG530 (no fuel pump lobe) which is nice and a K7 MD286 whatever that is?
Cam ID
-
YMJ
- 1275 Cooper S
- Posts: 1025
- Joined: Thu Jun 24, 2010 2:31 pm
- Location: Beyond the Sun
Cam ID
Absolutely pissing down here this afternoon, so i thought I'd have a clearout and a stocktake.
Found a half inch lobe cam with slot drive and one raised square shouldered ring between the inlet and oulet lobe of No3. No other markings. What is this?
Found also a AEG530 (no fuel pump lobe) which is nice and a K7 MD286 whatever that is?
Found a half inch lobe cam with slot drive and one raised square shouldered ring between the inlet and oulet lobe of No3. No other markings. What is this?
Found also a AEG530 (no fuel pump lobe) which is nice and a K7 MD286 whatever that is?
Re: Cam ID
AEG 510 cooper sFound a half inch lobe cam with slot drive and one raised square shouldered ring between the inlet and oulet lobe of No3. No other markings. What is this?
Kent Md 286 CamshaftK7 MD286 whatever that is?
-
YMJ
- 1275 Cooper S
- Posts: 1025
- Joined: Thu Jun 24, 2010 2:31 pm
- Location: Beyond the Sun
-
YMJ
- 1275 Cooper S
- Posts: 1025
- Joined: Thu Jun 24, 2010 2:31 pm
- Location: Beyond the Sun
Re: Cam ID
'Found two more, both 3/8" lobes with pin drive and two round shouldered rings between lobes 1 and 2.
-
cooper´s 65
- Basic 850
- Posts: 40
- Joined: Thu Jun 24, 2010 4:00 pm
-
YMJ
- 1275 Cooper S
- Posts: 1025
- Joined: Thu Jun 24, 2010 2:31 pm
- Location: Beyond the Sun
Re: Cam ID
You mean 12G165 or AEA630?cooper´s 65 wrote:http://members.home.nl/mmarx/mini/camshaft.htm Could it be cam nr3?
very lilkely, bearing in mind what has passed through the shed over the past 30 years.