Re: Mk2 Rebuild.
Posted: Wed Oct 25, 2017 11:19 pm
Mark 2 Minis were like that in 1980!rich@minispares.com wrote:that's not bad at all
mk1-forum.net
A friendly international forum for people interested in the tuning & modification of classic BMC vehicles
https://mk1-forum.net/
Mk2 Rebuild.
Page 2 of 2
Re: Mk2 Rebuild.
Posted: Thu Oct 26, 2017 9:40 am
If only they came together that quick in real life!
Looking good.
Looking good.
Re: Mk2 Rebuild.
Posted: Mon Dec 18, 2017 3:58 pm
On further inspection, parts of the heel board and floor sections were affected by rust more than expected, I wanted it to be neat and done properly so I decided the best course of action was to buy a full floor from M machine and install. Yes it's probably overkill but I figured that would be the best way.
Floor out, Toe board ends repaired and rust proofed.
image by Jack Wilder, on Flickr
New floor pan installed and aligned with subframes and measurements, then held in place with clamps and skin pins, ready to be plug welded into place.
image by Jack Wilder, on Flickr
image by Jack Wilder, on Flickr
Floor out, Toe board ends repaired and rust proofed.
image by Jack Wilder, on FlickrNew floor pan installed and aligned with subframes and measurements, then held in place with clamps and skin pins, ready to be plug welded into place.
image by Jack Wilder, on Flickrimage by Jack Wilder, on Flickr