Has anyone used these Pistons in a daily drive 850 ?
Macker
Are these Pistons ok
-
Macker2
- 850 Super
- Posts: 156
- Joined: Thu Oct 11, 2012 8:20 pm
- Location: Wigan
Are these Pistons ok
You do not have the required permissions to view the files attached to this post.
-
ianh1968
- 1275 Cooper S
- Posts: 1012
- Joined: Sat Nov 03, 2012 6:00 pm
- Location: West Sussex
Re: Are these Pistons ok
They look like some mentioned in the David Vizard book...
Brand: Hepolite(15037/K)
Type: Cast 'W' Type
Bore size: 848
Rings: 3 Compression, 2 oil control, 0.070" 0.070" 0.070" 0.125" 0.125" thickness
Compression Height: 1.498"
Crown Style: Shallow Dish 1.5cc
Total Weight: 304g
Pin Weight: 53g
Std CR: 8.3
Comments: Not suitable for high perf. use. Use for std rebuild only
Hope this helps...
Ian
Brand: Hepolite(15037/K)
Type: Cast 'W' Type
Bore size: 848
Rings: 3 Compression, 2 oil control, 0.070" 0.070" 0.070" 0.125" 0.125" thickness
Compression Height: 1.498"
Crown Style: Shallow Dish 1.5cc
Total Weight: 304g
Pin Weight: 53g
Std CR: 8.3
Comments: Not suitable for high perf. use. Use for std rebuild only
Hope this helps...
Ian
-
Macker2
- 850 Super
- Posts: 156
- Joined: Thu Oct 11, 2012 8:20 pm
- Location: Wigan
Re: Are these Pistons ok
Thanks,
Maybe I am just lucky but the guy that did the rebore for me seems to have these readily available oversize for the 850 engine.
Macker
Maybe I am just lucky but the guy that did the rebore for me seems to have these readily available oversize for the 850 engine.
Macker