Can anyone confirm if the wire circlip above is the same part number (37H8706) as the one used on the outer end of early and late drive shafts to retain the CV joint? The Mini Spares web site implies it only fits the outer end, but dimensionally it seems correct for the inner end, where the late shafts lock into the pot joint.
Thanks.
Michael
Wire circlip on inner end of pot joint drive shaft
-
Michael7
- Basic 850
- Posts: 62
- Joined: Mon Aug 02, 2010 11:26 pm
- Location: Virginia and California USA
- Been thanked: 2 times
Re: Wire circlip on inner end of pot joint drive shaft
Somerford's web site was able to confirm this. This site seems to have more readable and clear-cut tech information than does Mini Spares.
-
guru_1071
- 1275 Cooper S
- Posts: 2109
- Joined: Thu Jun 24, 2010 7:47 pm
Re: Wire circlip on inner end of pot joint drive shaft
please note, these are my own, individual sales, nothing whatsoever to do with my employer, minispares
-
Michael7
- Basic 850
- Posts: 62
- Joined: Mon Aug 02, 2010 11:26 pm
- Location: Virginia and California USA
- Been thanked: 2 times
Re: Wire circlip on inner end of pot joint drive shaft
Thanks for updating that. I'll direct future tech inquiries to you, since the main office is so busy shipping!
Michael
www.7ent.com
Michael
www.7ent.com