Wiper Automatic OFF/ON ex-works

Post any technical questions or queries here.
Post Reply
HRD
Basic 850
Posts: 36
Joined: Wed Oct 30, 2013 2:03 pm
Location: France

Wiper Automatic OFF/ON ex-works

Post by HRD »

Hi All,

I'm looking for the scheme electric for wiper automatic on my Austin Cooper. I have a wiper motor two speeds but i would like install a switch Off/On automotic for the wipers for exemple ex-works CRX 89 B.

Thank in advance.

Cheers
You do not have the required permissions to view the files attached to this post.
Smiffy
998 Cooper
Posts: 702
Joined: Fri Jun 25, 2010 10:33 am
Been thanked: 2 times

Re: Wiper Automatic OFF/ON ex-works

Post by Smiffy »

HRD
Basic 850
Posts: 36
Joined: Wed Oct 30, 2013 2:03 pm
Location: France

Re: Wiper Automatic OFF/ON ex-works

Post by HRD »

Yes, to have two speed, but I would like a position just go and back automatic.

Thank.
mk1
Site Admin
Posts: 19846
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 3 times
Been thanked: 8 times

Re: Wiper Automatic OFF/ON ex-works

Post by mk1 »

You need a self parking wiper motor to achieve this. If your motor is just a 2 speed motor with no self park facility then it can't be made to self park, there needs to be a special contact on the big gear wheel inside the motor and the gear cover to achieve this.

Image

M
HRD
Basic 850
Posts: 36
Joined: Wed Oct 30, 2013 2:03 pm
Location: France

Re: Wiper Automatic OFF/ON ex-works

Post by HRD »

Hi Mark,

Thank you for reply.
It's my wiper motor on picture.

Regards.

Pierre
You do not have the required permissions to view the files attached to this post.
mk1
Site Admin
Posts: 19846
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 3 times
Been thanked: 8 times

Re: Wiper Automatic OFF/ON ex-works

Post by mk1 »

If you have a self parking wiper motor you can change the place it self parks by slackening off the case screws & rotating the cover so the wiper parks where you want it to. I do not think you need a special switch to achieve this.

M
Post Reply