Dynamo problem

Post any technical questions or queries here.
Post Reply
nickacb
998 Cooper
Posts: 281
Joined: Tue Nov 01, 2011 4:31 am
Location: Mexico City

Dynamo problem

Post by nickacb »

Some months ago, my car ('60s mini) just left me without any battery whatsoever in the middle of an avenue. Someone passed me some power just enough to make it to my home. I had the dynamo checked and the coil was in pretty bad state so I had it refurbished. Put the dynamo back and after a couple of days the "ign" indicator wouldn't turn off, but kept driving the mini anyway so eventually, the battery ran out of power again 2 weekends ago.

So I fully charge the battery and took the dynamo alone back to the electical mechanic who said that in his shop was working fine, so in his opnion the dynamo is ok, but still took the whole car to check it fully working. That was saturday, the mechanic found nothing wrong in the running car (the baterry was recieving charge from the electrical system) and the whole day the "ign" indacator didn't turn on

Unforunately, the "ign" indicator turned on just yesterday so I'm assuming the battery is not receiving charge again, but I dont know what else to check. (the battery is fully charged, the dynamo worked fine in the workshop and all sunday in the running car, and nothing seems to be wrong with the regulator)

Hope someone could give me some advice, thanx.

Nick
ivor badger
998 Cooper
Posts: 365
Joined: Mon Jul 05, 2010 5:45 pm

Re: Dynamo problem

Post by ivor badger »

Check the wiring on the regulator box, especially under the plastic covers for the terminals.
User avatar
sclemow
998 Cooper
Posts: 338
Joined: Thu Jun 24, 2010 1:02 pm
Location: Bristol, UK

Re: Dynamo problem

Post by sclemow »

If it's not connections in the regulator, I've found this useful in the past .....

http://www.mgcars.org.uk/imgytr/pdf/lucas.pdf
nickacb
998 Cooper
Posts: 281
Joined: Tue Nov 01, 2011 4:31 am
Location: Mexico City

Re: Dynamo problem

Post by nickacb »

Thanx for the replies, i'm taking it tomorrow to find out where exaclty is the problem cuase its wierd that the dynamo works fine for a day, everytime i put it back from a check.

Nick
Post Reply