Fresh air hose / servo clip

General Chat with an emphasis on BMC Minis & Other iconic cars of the 1960's.
Post Reply
ricardo
998 Cooper
Posts: 730
Joined: Thu Jun 24, 2010 12:30 pm
Location: Portugal

Fresh air hose / servo clip

Post by ricardo »

Does anyone know where can I buy a clip to hold the fresh air heater hose to the servo? Similar to the following one:

Image

Thanks
Fanfaniracing
1275 Cooper S
Posts: 1289
Joined: Sun Feb 19, 2012 11:11 am
Location: Somewhere west Switzerland...
Been thanked: 3 times

Re: Fresh air hose / servo clip

Post by Fanfaniracing »

hi ricardo

try ligarex.ch

it is not 100% the same closing but the but the rest is the same.

if you wont buy the full kit i can send you a half meter plus clips for 5€ or so plus postage.

regards

fabian
I promise i won't buy another MkI...
Gray
998 Cooper
Posts: 588
Joined: Thu Jun 24, 2010 2:31 pm
Location: Nailsworth, Glos.
Has thanked: 1 time

Re: Fresh air hose / servo clip

Post by Gray »

Available here but you will probably need 2 or 3 to reach around. http://www.autoelectricsupplies.co.uk/p ... ategory/65
ricardo
998 Cooper
Posts: 730
Joined: Thu Jun 24, 2010 12:30 pm
Location: Portugal

Re: Fresh air hose / servo clip

Post by ricardo »

Thanks Fanfaniracing and Gray, that is helpful.
Fanfaniracing
1275 Cooper S
Posts: 1289
Joined: Sun Feb 19, 2012 11:11 am
Location: Somewhere west Switzerland...
Been thanked: 3 times

Re: Fresh air hose / servo clip

Post by Fanfaniracing »

Hey!

I think Gray's are the better option as they look more like the original.

Ligarex are the best i know to fix the CV Gaiter.

Ricardo, do you have a spare example of the Mowog-sticker you made for your subframe?

My letters just were going in to dust as the subframes were sandblasted...

regards fabian
I promise i won't buy another MkI...
rolesyboy
1275 Cooper S
Posts: 2315
Joined: Fri Jun 25, 2010 10:57 am
Location: Colchester, Essex
Has thanked: 2 times
Been thanked: 1 time

Re: Fresh air hose / servo clip

Post by rolesyboy »

Ricardo- any chance of a copy of the MOWOG stencil please? I have the same problem ie blasters took it away before I had chance to copy it. Cheers. Mark
Rolesyboy
ricardo
998 Cooper
Posts: 730
Joined: Thu Jun 24, 2010 12:30 pm
Location: Portugal

Re: Fresh air hose / servo clip

Post by ricardo »

Yes, I still have a few. Everyone interested, please send me a PM.
Post Reply