I lost the screw for it! since all the nuts and bolts on the metro are non metric i wont be able to get one from the usual iron mungues
Any ideas please?
screw wanted for condensor from distributor
-
Crack Pot
- Basic 850
- Posts: 98
- Joined: Wed Nov 20, 2024 8:07 pm
- Location: Eastlands Manchester
- Has thanked: 4 times
- Been thanked: 6 times
screw wanted for condensor from distributor
Austin Metro MK1 1982 1.3L (same engine and box as the mini)
-
Ronnie
- 1275 Cooper S
- Posts: 1278
- Joined: Fri Jun 25, 2010 5:37 pm
- Location: N/E England Where the SAND is GOLDEN and the sea is always COLD!!
- Has thanked: 9 times
- Been thanked: 25 times
Re: screw wanted for condensor from distributor
It will be BA if it's a proper form thread, possibly 4BA 
-
Crack Pot
- Basic 850
- Posts: 98
- Joined: Wed Nov 20, 2024 8:07 pm
- Location: Eastlands Manchester
- Has thanked: 4 times
- Been thanked: 6 times
Re: screw wanted for condensor from distributor
I have never heared of BA before. Is for the size for it then?
Austin Metro MK1 1982 1.3L (same engine and box as the mini)
-
timmy201
- 1275 Cooper S
- Posts: 1995
- Joined: Mon Jun 10, 2013 9:57 am
- Location: Australia
- Been thanked: 34 times
Re: screw wanted for condensor from distributor
BA is the class of threads, different to UNC and UNF
The horn button screw on a mini is 2BA
https://britishfasteners.com/threads-ba ... MHF-3HpqiK
The horn button screw on a mini is 2BA
https://britishfasteners.com/threads-ba ... MHF-3HpqiK
-
Peter Laidler
- 1275 Cooper S
- Posts: 6344
- Joined: Sat Jul 15, 2017 5:35 pm
- Location: Abingdon Oxfordshire
- Has thanked: 115 times
- Been thanked: 97 times
Re: screw wanted for condensor from distributor
For Christs sake, just send me your address and I'll send you some........