Loctite 3020

[YORKY]

Just watched a video where an engine builder used Loctite 3020 aerosol on a Victor Reinz head gasket. He claims Keith Calver uses this method. I would appreciate your opinion.

Cheers Jim

[timmy201]

Here's some of his posts about it:
https://www.facebook.com/share/p/1ABCYfzb3f/
https://www.facebook.com/share/p/1Bh1i3wtjm/

[Exminiman]

Looks as if its designed for the job, maybe a slightly more convenient version of Wellseal ?

https://datasheets.tdx.henkel.com/LOCTI ... -en_GL.pdf

https://www.henkel-adhesives.com/uk/en/ ... 30200.html

If Keith Calver does use it, its got to be a worthwhile recommendation, he wont be using anything that causes him more hassle….I wonder if there has been any failures while using it?

[850RS]

I’ve been running the VR small bore gaskets on my 998 race motor and I’ve had great luck. No failures yet in two seasons of racing. I haven’t tried the locktite spray on them though.

[Spider]

Victor Renz (and most other head gasket manufacturers) expressly do not recommend using any sealant on these gaskets. They have a heat activated sealant applied as part of their manufacture.

I don't and have never found the need for it.