Looking to finish off my 1966 “S”.
Seems I am missing the boots circled below.
Located in the USA near Philadelphia (19426).
Spark Plug Boots
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
4) Please always include your LOCATION
Rev 2.0 (10.09.2024)
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
4) Please always include your LOCATION
Rev 2.0 (10.09.2024)
-
rogerotto66s
- 998 Cooper
- Posts: 583
- Joined: Mon Sep 10, 2018 8:29 am
- Location: Collegeville,PA USA
Spark Plug Boots
You do not have the required permissions to view the files attached to this post.
Roger Williams
1966 Austin Cooper S - LHD - Wet - Personal Export
1966 Austin Cooper S - LHD - Wet - Personal Export
-
360gts
- 1275 Cooper S
- Posts: 2976
- Joined: Sat May 24, 2014 7:12 am
- Has thanked: 1 time
- Been thanked: 27 times
Re: Spark Plug Boots
Roger
You can make these from thick wall shrink tubing....the tubing that shrinks more than 50%
Cheers
Dermott
You can make these from thick wall shrink tubing....the tubing that shrinks more than 50%
Cheers
Dermott