1st and 2nd synchro hub balls and springs

Post any technical questions or queries here.
Post Reply
User avatar
Andrew1967
1275 Cooper S
Posts: 7903
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK
Been thanked: 1 time

Re: 1st and 2nd synchro hub balls and springs

Post by Andrew1967 »

I do the same as Roger does, use a decent Jubilee clip .. in a suitable container so if there is a mishap the balls don't disappear again !!
Top
InnoCooperExport
998 Cooper
Posts: 654
Joined: Tue Mar 31, 2020 8:44 pm
Location: The Netherlands
Been thanked: 3 times

Re: 1st and 2nd synchro hub balls and springs

Post by InnoCooperExport »

I went the same way as Chris (Spider) and bent up a piece of metal. The plastic bag is a good tip i will try to remember if ever have to do that job again.
Of course I know what a dipstick is, you get called something often enough you look it up!
Top
Post Reply

Return to “Technical Talk”