METRO ENGINE/GEARBOX
-
- Basic 850
- Posts: 50
- Joined: Sat Jun 06, 2020 1:02 pm
- Location: Swindon wilts
- Has thanked: 1 time
METRO ENGINE/GEARBOX
Hi, i wonder if anyone can advise me please, I have a engine and gearbox from what I think was a metro it’s been in my garage for years, i was about to ring the scrap man but thought I would ask first the engine NO is 12HC 14AA 11232. thanks in advance.
- mab01uk
- 1275 Cooper S
- Posts: 8252
- Joined: Thu Jun 24, 2010 7:08 pm
- Location: S.E. England
- Has thanked: 91 times
- Been thanked: 67 times
Re: METRO ENGINE/GEARBOX
No one should ever scrap any Mini or Metro engine/gearbox these days! Especially a 1275cc MG Metro engine which is one of the most desirable A+.
Always offer to sell or give them away for spares or repair first to any takers.
They are no longer found in the few breakers yards that remain around the UK and replacements are of course not coming out of any BL/Rover factories anymore....
Source Vehicle : MG Metro
Engine type & CC : A+ 1275 cc Transverse mounted
Fueling :
Engine features :
Pre-engaged starter
1985 Requirements
Breakerless (electronic) ignition
Gearbox features :
Std. Ratio Rod Change gearbox with Pot Joints
3.4:1 Final Drive
Engine No: 12HC 14AA 11232
A Series & A+ Engine number decoder:-
http://www.guess-works.com/Tech/engine.htm
Always offer to sell or give them away for spares or repair first to any takers.
They are no longer found in the few breakers yards that remain around the UK and replacements are of course not coming out of any BL/Rover factories anymore....
Source Vehicle : MG Metro
Engine type & CC : A+ 1275 cc Transverse mounted
Fueling :
Engine features :
Pre-engaged starter
1985 Requirements
Breakerless (electronic) ignition
Gearbox features :
Std. Ratio Rod Change gearbox with Pot Joints
3.4:1 Final Drive
Engine No: 12HC 14AA 11232
A Series & A+ Engine number decoder:-
http://www.guess-works.com/Tech/engine.htm
Last edited by mab01uk on Thu Feb 15, 2024 7:28 pm, edited 1 time in total.
-
- 998 Cooper
- Posts: 649
- Joined: Sat May 19, 2012 5:38 pm
- Location: Newton Abbot
- Been thanked: 3 times
Re: METRO ENGINE/GEARBOX
It’s an MG Metro engine. Don’t chuck it out, it’s worth selling even as a core unit.
http://www.guess-works.com/Tech/engine.htm
http://www.guess-works.com/Tech/engine.htm
You do not have the required permissions to view the files attached to this post.
-
- 998 Cooper
- Posts: 576
- Joined: Thu Feb 19, 2015 9:16 pm
- Location: Sussex
- Has thanked: 2 times
Re: METRO ENGINE/GEARBOX
Please do not scrap it. Sell it or give it away if you want rid but do not scrap it.
- Costafortune
- 1275 Cooper S
- Posts: 2022
- Joined: Thu Feb 16, 2017 9:26 am
- Location: Sheffield On Thames
- Has thanked: 10 times
- Been thanked: 21 times
Re: METRO ENGINE/GEARBOX
A complete MG Metro engine and box - if it turns over by hand - is £500 minimum.
That would have been an expensive mistake!
That would have been an expensive mistake!
-
- Basic 850
- Posts: 50
- Joined: Sat Jun 06, 2020 1:02 pm
- Location: Swindon wilts
- Has thanked: 1 time
Re: METRO ENGINE/GEARBOX
Thanks for your comments, I will check tomorrow to see if it turns over, I also have a 1275 GT engine which is not complete but it has been rebored and has new pistons on the Conrods, I have to try to sell most of the parts I have to finance my GT and the classic bikes( about eight) which I have had since the 1960s, I am eighty now and feel I am running out of time.
-
- 998 Cooper
- Posts: 586
- Joined: Mon Feb 08, 2016 9:19 am
- Been thanked: 2 times
Re: METRO ENGINE/GEARBOX
hi colin
i know how you feel i am also 80 and trying to build my v8 mini clubman and a 1970 triumph daytona engine from parts i might get something finished but which one is in the lap of the gods
cheers roger mcnab
i know how you feel i am also 80 and trying to build my v8 mini clubman and a 1970 triumph daytona engine from parts i might get something finished but which one is in the lap of the gods
cheers roger mcnab
- Andrew1967
- 1275 Cooper S
- Posts: 7903
- Joined: Thu Jun 24, 2010 6:35 pm
- Location: Usually in my garage on the east coast of Norfolk, UK
- Been thanked: 1 time
Re: METRO ENGINE/GEARBOX
Hi Colin, my Dad is 84 this year and still going strong with his classic cars, it's what keeps him going.
You've certainly a few £'s there with that MG Metro lump. Will make very good money if its not seized and even if it is, will still be very sought after.
You've certainly a few £'s there with that MG Metro lump. Will make very good money if its not seized and even if it is, will still be very sought after.
-
- Basic 850
- Posts: 50
- Joined: Sat Jun 06, 2020 1:02 pm
- Location: Swindon wilts
- Has thanked: 1 time
Re: METRO ENGINE/GEARBOX
Thanks for the encouragement from those of you who that are around my age I did try to turn the engine today but it didn’t move, i will take a couple of photos and see if someone will make me an offer, my problem is like most of our age I am not in the best of health but I work most days either on one of my bikes or one of my cars, I also walk a few miles every week and just starting a new project, the young lad we brought up from a baby when we were 47 started road racing a ex apple yard R6 in 2022 but has now bought a ZX10R 1000 Kawasaki which we will be preparing for him to race,so something to look forward to. thanks again and sorry to go on. PS I won’t scrap the engine.
- Peter Laidler
- 1275 Cooper S
- Posts: 6143
- Joined: Sat Jul 15, 2017 5:35 pm
- Location: Abingdon Oxfordshire
- Has thanked: 29 times
- Been thanked: 30 times
Re: METRO ENGINE/GEARBOX
I wouldn't worry about your age Colin. I'm 75 and been around the block a few times, still own a Mini Cooper and a much loved kick-start era Commando
-
- Basic 850
- Posts: 50
- Joined: Sat Jun 06, 2020 1:02 pm
- Location: Swindon wilts
- Has thanked: 1 time
Re: METRO ENGINE/GEARBOX
Thanks Peter, you have helped me out once before with the hydrolastic on my GT, that’s all ok now thanks to you and nice know you have good old British bike.
-
- Posts: 4
- Joined: Fri Apr 05, 2024 8:20 am
Re: METRO ENGINE/GEARBOX
Hi Colin , I'm looking for a metro engine with auto box atm. is yours an auto ? thanks