I'm busy rebuilding transmissions and have a question?
-
CooperTune
- 1275 Cooper S
- Posts: 1293
- Joined: Sun Sep 22, 2013 1:47 pm
- Location: Coastal VA USA
- Been thanked: 1 time
I'm busy rebuilding transmissions and have a question?
For years I have kept a cheat sheet on speedo drive gears for different CWP sets. Seem I have misplaced the info. I'm doing a pre A+ rod change with an A+ 3.44 CWP. the Pup rides on 10 inch wheels. I should have the correct gears just need to know which to look for. Thanks Steve (CTR)
-
Smiffy
- 998 Cooper
- Posts: 697
- Joined: Fri Jun 25, 2010 10:33 am
-
Spider
- 1275 Cooper S
- Posts: 4775
- Joined: Mon May 07, 2012 6:10 am
- Location: Big Red, Australia
- Has thanked: 59 times
- Been thanked: 15 times
Re: I'm busy rebuilding transmissions and have a question?
All ours out here with that set up were 6/17. They were ex-UK.
-
Jason
- 850 Super
- Posts: 224
- Joined: Fri Nov 26, 2021 10:45 am
- Location: ST8, Staffordshire, UK
- Been thanked: 1 time
Re: I'm busy rebuilding transmissions and have a question?
Pre 1984 with 3.44 or 3.7 FD running 10” wheels use 6tooth worm and 17teeth pinion.
-
CooperTune
- 1275 Cooper S
- Posts: 1293
- Joined: Sun Sep 22, 2013 1:47 pm
- Location: Coastal VA USA
- Been thanked: 1 time
Re: I'm busy rebuilding transmissions and have a question?
Thank you, I was able to go back to the shop and find my notes. I have begun removing CWP and speedo gears and storing together. I have always stored CW and pinion tie wrap together. I may have as many as 17/18 gear boxes. The plan was to rebuild them all. Time involved and cost of parts make me wonder is it's worth it. Steve (CTR)