HOSE-CARD/FOIL- HEATER TO DEMISTER DUCT

[9330FN]

Has anyone found a good supplier for the card/foil demister ducts, think its 36" long per side.

Mike

[mk1]

There is a guy who attends local autojumbles in the North of England who often has this stuff. Sadly I don't know his name though.

I have used Henry Hoover pipe on my last couple of cars.

Much more resilient than the card / tin foil stuff.

[AndyPen]

I have used Henry Hoover pipe on my last couple of cars.

Now why am I not surprised Mark

[Catmint]

Car builder solutions have a good range of ducting, inc foil and card

https://www.carbuilder.com/uk/ducting#/ ... &orderBy=0

[indigo]

Anyone found a good supplier for the card/foil heater to demister duct for the Mk1?
32mm ID.
I found a 2 ply silicon one on Ebay, but not quite the same.

[mk1]

It is still possible to get this stuff made to the original spec, but the amounts needed for an order make it uneconomic to do.

[SMOKE GREY]

[attachment=0]IMG_4070.jpeg[/attachmen.

These are early Porsche, screen ducts. Virtually identical to original BMC. And they are cheap! Order from your Porsche dealer, part number for your reference

[mk1]

Great tip, thanks Steve.

[mk1]

Just ordered 4 from my friendly neighbourhood Porsche centre, £7.50 each.

M

[Chapmag]

My Porsche centre is quoting me £9.00!!!!

[rolesyboy]

£7-50 plus VAT =£9

[111Robin]

You'd better watch. Porsche will catch on to this sudden demand and whack the prices up

One of my pet hates is walking into these "premium" dealerships for parts and having them look down their noses at the oink in oily overalls on their pristine floors. Some sensibly have the parts counter round the back of the showroom but the ones I've had to frequent have been through main reception where all of the suited and booted salesmen look at you in disgust for daring to enter their shrine. Maybe it's just me .

[Classic1]

It's the same type of person that works in a swanky hotel
What they have to be snotty about I will never understand that feels better rant over

[mk1]

Have bought lots of stuff from the Leeds Porsche centre (mainly for my Brother) and have always found the parts guys knowledgable & helpful.

[mk1coopers]

Waits for the enterprising soul that takes them out of the packet and adds a BMC repro label for their eBay sale site at £15 each.....

[mk1]

It'll happen

[indigo]

Excellent, will order a couple tomorrow!

[SMOKE GREY]

Just ordered 4 from my friendly neighbourhood Porsche centre, £7.50 each.

M

You’ll be pleased with them! Only came across them cause I was doing a parts list for a guy restoring a 911 and 356 . Bonus was he was a rally lad from years ago and owned a Harry Rat tuned 1071 back in the day.

[mk1]

Close but no cigar. They are too big

These are about 40mm we need 36mm ID.

M

[Oneball]

There’s a bunch of sizes on a Beetle 50mm, 47mm, 32mm, 25mm

IMG_5003.jpeg