SU Suction Chamber Seals
-
gs.davies
- Site Admin
- Posts: 1752
- Joined: Fri Oct 26, 2012 2:29 pm
- Location: Essex, UK
- Has thanked: 70 times
- Been thanked: 66 times
- Contact:
SU Suction Chamber Seals
Should there be such a thing? I just read an article on rebuilding the HS2 that made reference to a seal between the carb body and the suction chamber pot.. I've not seen one before, have I been missing out all these years?
-
mk1
- Site Admin
- Posts: 19833
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 3 times
- Been thanked: 9 times
Re: SU Suction Chamber Seals
I must have rebuilt 50 sets of SU's & I have never seen one 
The top needs to be sealed, but this is done by a good fit between the dash pot & the body.
Lots of info here;
https://mk1-performance-conversions.co.uk/tuning_su.pdf
The top needs to be sealed, but this is done by a good fit between the dash pot & the body.
Lots of info here;
https://mk1-performance-conversions.co.uk/tuning_su.pdf