Hi
Probably covered before but I can’t find it.. what’s the approx stroke of a clutch master cylinder (tin type)?
Clutch master cylinder stroke
-
AndyPen
- 1275 Cooper S
- Posts: 3918
- Joined: Mon Jul 24, 2017 5:55 pm
- Location: South Wales
- Has thanked: 18 times
- Been thanked: 49 times
Re: Clutch master cylinder stroke
The pushrods are 68.5 mm long from base to hole centre, and the travel from pin hole centre to the base / foot of the can (where it sits on the bulkhead) is 70 mm.
Dimensions courtesy of 1071 Bob when we were comparing notes
Dimensions courtesy of 1071 Bob when we were comparing notes