As we (Billy and I) were hijacking InnoCooperExport*s build topic recently, I thought as a little appology I post the Position for the side repeaters on Innocenti Minis (taken from a '72 Inno Cooper Pre-Export) - I suppose it is not different on pre-Mk3 Innocenti Minis:
Opposite side is obviously just mirrored.
[info]: Innocenti Mini - Side Repeater Position (sketch)
-
MiNiKiN
- 1275 Cooper S
- Posts: 1005
- Joined: Tue Oct 10, 2017 3:15 pm
- Location: Graz/Austria // NN1 4ST previously
- Has thanked: 81 times
- Been thanked: 31 times
[info]: Innocenti Mini - Side Repeater Position (sketch)
You do not have the required permissions to view the files attached to this post.
Yes I am a nerd: I am researching the Austrian Mini-racing scene of the 60s and 70s 
-
InnoCooperExport
- 998 Cooper
- Posts: 676
- Joined: Tue Mar 31, 2020 8:44 pm
- Location: The Netherlands
- Has thanked: 3 times
- Been thanked: 9 times
Re: [info]: Innocenti Mini - Side Repeater Position (sketch)
I can confirm these measurements agree with others I have recieved from other Inno owners.
Basically halfway down the headlight and then in line with the end of the seam of the frontpanel with the wing in the wheelarch.
Basically halfway down the headlight and then in line with the end of the seam of the frontpanel with the wing in the wheelarch.
You do not have the required permissions to view the files attached to this post.
Of course I know what a dipstick is, you get called something often enough you look it up!