mk1 rear subframe replacement

Post any technical questions or queries here.
Post Reply
devoys 997 cooper
Basic 850
Posts: 44
Joined: Fri Jan 13, 2012 6:04 pm

mk1 rear subframe replacement

Post by devoys 997 cooper »

hi i have just been under the car tonight and have discovered the years sitting in a garage have not been kind to the subframe :( it needs replacing, is it a case of just buying it off an auction site there seem to be plenty available ? or is it a specific size or design?.......also one wheel drum on rear missing is this the same principle as the subframe? 1962 cooper i will upload some pictures tomorrow regards mark
User avatar
sclemow
998 Cooper
Posts: 338
Joined: Thu Jun 24, 2010 1:02 pm
Location: Bristol, UK

Re: mk1 rear subframe replacement

Post by sclemow »

All of the dry subframes (ie non-hydro suspension) are interchangable although there are small differences between them like exhaust mountings, fuel pump mountings etc.
A '62 Cooper should be dry.
I personally wouldn't put a secondhand one.
Also, be aware quality of replacement frames is variable, even the heritage ones aren't that straight and some of the pattern ones are awful.

Simon
Post Reply