Hydrolastic Pump HG18G 703

[Minicooper1964]

Does anybody have a service manual for the Churchill hydrolastic pump twin pipe 18G703 . I understand there should be an operating instruction panel on top but mine is missing so either a date panel or picture of the wording on the panel would be appreciated.
Any pictures of other info would be much appreciated . Regards Bruce

[Minicooper1964]

‘Date panel’ should read ‘spare panel’

[Peter Laidler]

Have a look through the search facility under Hydrolastic before you go any further because I seem to remember that someone in Australia has had these plates remanufactured. There's a lot of info on the different parts tat have been re-sourced too.

I've just had a look - but you'll have to plough through a few pages of associated hydrolastic guff!!!!

[111Robin]

These are the instructions for the twin hose tool. There are a few of us on here that have restored these units so there is plenty of knowledge if you get stuck.

[Minicooper1964]

Hello folks thanks for all the feedback , its just what I need .

I plan to get the instruction panel remade so if you have a picture of that it would be most appreciated .

I post the pic of my unit in a bit

Thanks again to all Bruce

[111Robin]

If you search the posts there are pictures of the instruction panel, mine is too faded to be of any use.

[iain1967s]

See attached for my template

[iain1967s]

Original Churchill/BMC pump illustrated parts list attached

See also Mark Paget’s “bible” here: http://www.amvcnsw.com.au/austin1800/WS ... lastic.pdf

[Minicooper1964]

Iain thanks so much for the parts list and manual info . Amazing find .
Now where to find any service kits ???

[Minicooper1964]

Picture of my 18G703 rig attached

[iain1967s]

Now where to find any service kits ???

https://minisport.com.au/mini-hyrolasti ... laaustaloy