Proper hose clips - 1966 “S”

[rogerotto66s]

I am the second owner of this 1966 “S” (July build).
I am in the process of re-assembling the engine compartment.
The engine is in and the various clutch & brake cylinders as out getting rebuilt.

The AKD manuals and on-line references do not seem to cover my “S” ... at least based upon the clips originally on the car.
Are there any definitive sources for the proper clips for a 1966 “S”?

Here are a few pictures of what I have installed so far which I believe are original to the car.

Radiator hoses - top & bottom - double wire

36E52D90-8FA6-4E96-ADD7-B8C4BECDE264.jpeg

Fuel lines

648EC503-A1B5-4FC0-B75A-F1AD497F32E1.jpeg

Fresh air hose - reducer at bulkhead - double wire

AE46A1D4-6327-4BEA-9373-54080B808A56.jpeg

Fresh air hose - reducer at grill - double wire

548E3177-315D-4A76-8797-198C877EBF53.jpeg

Fresh air hose and radiator hoses - heater under dash - double wire and single wire

3BF41353-3858-44C1-AE67-CE4F88838266.jpeg

Do both ends of radiator hoses get the single wire?
What about other hoses such as brake servo?

[12345678]

I just pulled apart a ‘67 non s and those all look correct based on what I was dealing with…the fuel hoses or lines seem to be newer but the clamps look correct

Someone else will definitely have more expertise than me

[rogerotto66s]

Here is the clip on the hose attached on the heater.

6CBF9B7B-8C28-48FF-B71F-D9983C25C299.jpeg

Here is another clip behind the heater ear. It is around the heater hose and the demister vent hose.

43F11F47-955A-4B40-AC26-490FD1057739.jpeg

[Daz1968]

I always thought the radiator hose clips had round head slotted heads, I purchased some from catmint a while ago, clips come with slotted hex heads and round head slotted are supplied to replace them

[AndyPen]

The ones by the heater under the dash are called buckle clips.

These are very close indeed:


https://www.autoelectricsupplies.co.uk/ ... ategory/65